VACUUM TO THE EGR VALVE. I HAVE POWER TO THE SOLENOID BUT NO GROUND.THE GROUND, I THOUGHT CAME FROM THE PCM, I REPLACED THE PCM AND STILL NOT WORKING. CAN YOU HELP ME. In all the technical data I have
...EGR-valve and check all of the vaccum lines and try this website www.alldatadiy.com and another website is www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto ...
Question about 2001 F250 Super Duty Super Cab
...vacuum to the egr valve at warm idle opening it will cause an extremely poor Idle, this of course may not be it but theres a good chance. if you can see inside the egr to the rod for the valve, It ...
...vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open * Clean out the EGR valve and/or tubing to ...
...EGR vacuum solenoid, and DPFE sensor. Remove the air intake assembly (up to the throttle body). There are two vacuum lines from the EGR vacuum solenoid, find where they reach the EGR valve and the ...
Usually answered in minutes!
907 Questions
705 Questions
546 Questions
442 Questions
465 Questions