Questions & Answers for: Ford Expedition egr vacuum solenoid

Question about 1998 Expedition

1 Answer

...egr vacuum solenoid all on recommendation from staff at autozone. Cleared the code each time but after about 20 miles, sometimes less, the service enginge light comes back on. I need to get this car ...

Ad

...egr? vacuum? Hi there, my expedition has had a problem for a couple of days. Check engine light on, flashes when trying to go up a hill. It also hesitates to go up hill, have to ease up on gas pedal. ...

Ad

...EGR Vacuum Solenoid. Chilton lists possible causes below. Here's a link to the part you want. Best of luck! Greg ...

Question about 1998 Expedition

3 Answers

...Vacuum Regulator Control Circuit Malf. What could this mean? I have replaced the EGR Valve, EGR Solenoid, and the other Sensor on the firewall to the right of the EGR Valve(forgot name) Also replaced ...

Question about 1999 Expedition

1 Answer

...vacuum EGR flow path restricted EGRVR circuit shorted to PWR VREF open to DPF EGR sensor DPF EGR sensor downstream hose off or plugged EGRVR circuit open to PCM VPWR open to EGRVR solenoid DPF EGR ...

...egr is vacuum controlled, you must check the vacuum to the egr. there are also a related components called an egr pressure sensor, and egr control solenoid that have to be checked. electrical ...

Question about 2000 Expedition

3 Answers

...EGR vacuum diagram for your particular vehicle is displayed on the Vehicle Emission Control Information (VECI) label. The EGR system is Differential Pressure Feedback EGR (DPFE) system, controlled by ...

...egr vacuum solenoid, pvc valve. even bought a new air cleaner with all new sensors. any ideas? thanks. follow the pvc valve hose to the intake manifold it will be burn on the elbow ....check for ...

Question about 1998 Expedition

1 Answer

...vacuum hose is orange. It is available at most autoparts stores. If all sections of hose are ok, either DPFE (egr position sensor) or egr solenoid is bad. There should be a check engine light on for ...

Question about 2001 Expedition

1 Answer

...for the Vacuum to reach the EGR. If they are plugged, the EGR will not receive enough flow. Remember to clear the computer when changing parts or the old Codes will take 25-35 Startups to adjust

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

Manuals & User Guides

Loading...