...buy knew one ! or even have it done. last time I rebuilt my ford carb I paid about $18.00 dollars for the Master rebuilder kit ! also you will need a tach and dwell meter to adjust the carb.Good
...dwell and tach meter that i would like to connect to my sons honda VT750 cycle to adjust the carbs. Can I connect it to spark unit like they did the bikes tach WHY TAKE THE CHANCE OF SCREWING ...
...dwell timing, At the coil youll have a positive power at all times and at the negative part of the coil youll have a tach signal. What this does is ground very fast to collapse the magnetic field and ...
mt 418 dwell meter instructions automotive dwell tach meter
Question about 1991 Century
...you look for a dc pulse on that wire. If you have a digital multimeter that has a tach--duty cycle or dwell setting, it should react to a dc pulse. My info on your model year, isn't that
semi-decent dwell/tach - something in the 25 to 30 buck range should do nicely. Good luck. I thought it was 37-42 degrees just from memory of my 170 cid in my Ford Falcon automatic trans. don-ohio (:^
kal equip Unit works but needs calibration (tach reads low, don't know if dwell function is also inaccurate) How do I re-calibrate? what does tack & dwell have to do with CB radios?
tach--duty cycle or dwell setting, they should react to a pulse on the signal wire. The ref voltage is 12 volts, probably goes hot with key on. The black wire with white-ground use an led testlight to
Question about 2010 Street 125 DD
...Tach and dwell both connect to your coil. Hi, Anonymous there are multiple connections beginning with the wiring harness from the Tachometer that probably goes to the ECU which gets its data from the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions