Questions & Answers for: Whirlpool Cabrio dry cycle

are almost always twisted up in knots. We try and skake out all the wrinkles before putting them in dryer but after drying they still have most of the wrinkles. we were wondering if it was the way the

...dry sounding spin cycle During the high speed spin / rinse cycle, the noise is very loud and kind of a dry sound. After a year and a half of nice and quiet spin cycles, the noise seemed to start all ...

...dry because the spin cycle doesn't seem to be getting the water out of the clothes. The washer has a spin tube that goes from the top of the transmission to the top of the wash tube. On the bottom of ...

...dry and now they do not. Drive motors are often a source of trouble. These motors often run in forward and reverse. They spin one way to agitate and the other to spin. Just because it works in one ...

...dry bleach, provided: It's color safe (non-chlorine) bleach You add it to the detergent dispenser, NOT the bleach dispenser You're using powdered (not liquid!) detergent See below for more detailed ...

...cycle is operating. oL Overloaded. "oL" flashes when you got too dang many clothes in there. 18 pounds dry weight per load is what I go by. If the load is fine you could have an item of clothing in ...

dry spin with the drain valve/pump activated so as to drain off all the water from the clothes during the spin. Make sure that a fault in any of the cycle will relate to the specified action, so check

dry spin with the drain valve/pump activated so as to drain off all the water from the clothes during the spin. Make sure that a fault in any of the cycle will relate to the specified action, so check

cycle a second time to get them dry enough for the dryer. They are so wet after the normal spin cycle, I can wring water out of them... like they hadn't spun at all. After the second run through, they

...dry cycle? During the dry cycle, the dryer beeps (not the beep, beep, beep, finishing alert, but a beep with pause before the next beep) about 10 times before stopping. Turning of drum is ...