Questions & Answers for: Brother drum turns slow

Dust on Drum... Have not had any trouble with using 7820N until recently with messege of "dust on drum"..have taken drum out and cleaned area in question; but still is with error messege...has anyone ...

...slow yellow flash & now, it won't print . I have hit the "go" button 8 times & it did print out the settings & status. Nothing looks of concern. I changed out the toner & drum to a new set. Turned it ...

...slow 1 @ a time), then let go. Put toner/drum back in........RESET. Also, for toner light - o the sides of the toner cart, there is a small round port that apparently an LED light sees thru. If your ...

...slow. Drum life is 82% and I'm getting no toner warnings. The copy function is working fine. There does seem to be more noise on the phone line. If the dial tone sounds NOISY or SCRATCHY there ...

...drum if the jamming and "dust on drum" messages are going to constantly slow me down. Any suggestions? take the drum out and clean the grid on the drum unit. this is called the corona wire in the ...

...slow when making copies. What could the problem be? Also has been going through alot of toner.. Depending on how many copies you have it might be time for a new drum unit. Also, you can change the ...

...for our machine is U565 77G3J544033 and it is a Model 2800 Intellifax. Is it worth changing the drum or should our office just purchase another fax? No, not worth it. A very slow, old, fax ...

I have a brother 5250dn printer that's on strike right now. At first it wouldn't print indicating a drum problem. We addressed that issue by resetting the drum counter (took out the toner/drum and ...

...same thing. Checked and found no problem. SIR/MADAM If you have print quality problems, clean the drum unit as follows: 1.Turn off the printer power switch. Press the front cover release button and ...

...slow. Please help. To clear "replace drum", open the front door with the power on and press the "clear/back" button. The display should change to "replace drum?", press the"1" button then "ok" button ...