...drum doesn't move or spin so clothes remain wet. Do not hear any noise of motor trying to start. We had a mini flood during the night when part broke in the toilet tank causing water to overflow thru ...
...front loading washer broke it threw the machine so hard off baoance that a chunck of the plastic drum was broken out at the top of the cylander. My husband lued those pieces back into place and ...
...front loading washer is shaking itself to pieces. it has broke one of the bolts that attach the drum to the washer frame. it is on a hardwood floor and the feet are level. YOUR INTERNAL SHOCK ...
Question about Elite 45986 Front Load Washer
...front load washer leaves tan stains/marks on many of our clothing. Is this mildew/ fungus problem. I wash with hot water and vinegar approx. 1 a month. this sounds like the bearings are wearing ...
Makes loud noise during the spin cycle. The drum move back and forth by hand. no loud noises water will drain, just belt broke plastic piece needs to come off so I can replace belt.
...broke two of the 8182233 plastic baffles broke from the washer drum how do I replace them. This is a common problem on front loaders,Once you get the new baffles they just snap in.They have
Question about Elite 45986 Front Load Washer
...drum is loose inside and the door won't shut. What do I do? How do I get to the inside to see what part broke? sounds like the stabilizers broke or came loose. you should be able to remove the front ...
...front load washer. The support leg on the right side the sides up and down to control the drum, broke. This caused the drum to beat the **** out of most of the components in the washer. What is my ...
Question about 3.8 cu. ft. HE3 Front Load Washer
...drum movement.(The load wasnt a very large load.) Have any idea what i could check? You will need to check the belt from the motor to the drum. It is either broke or somehow fell off its pully. ...
front load washer apart to get to the pump and belts with machine disconnected.at the top is a flat wooden paneland at the rear of machine is two little screws one at each side remove this will expose
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions