Questions & Answers for: drive block

...Drive Block Size I am using HP C7438A to do my backup/restore job, i am experienced slow restore process by using this drive, which takes me 16 hours to complete the job, as i try the same task in ...

...drive block is worn and needs to be replaced. (The basket drive block is located on the gearcase drive shaft, under the tub and agitator) If this has been happening for a long time you may need to ...

...drive block I'm replacing the drive block on my Kenmore model 70 washer, but I'm having trouble getting the spin basket off of the drive block (assuming that's my next disassembly step). I've taken ...

...Drive Block and the Brake and Drive Tube. The clutch on the transmission drives the Brake and Drive Tube when in spin mode, the Basket Drive Block transmits the spinning of the Drive tube to the tub. ...

...drive block doesnt hold cutter pin Razor makes louder noise--cutter drive pin somewhat loose in plastic drive block, Replaced cutter & comb with no change. Cutter seems to oscillate with shorter ...

...drive, block-by-block, trying to merge blocks of data back into files that can be copied onto your 'C:' drive. It sounds like your Verbatim external hard drive has got some logical damages for that ...

...block as "never-to-be-used", or the disk-drive itself will designate one of the "spare" blocks on the disk as the permanent substitute for the "bad" block. When the utility completes, it will either ...

...are still valid. Look online for a "file recovery" or "file scavenger" program, which reads through the disk-drive, block-by-block, trying to "stitch" the blocks together, to reconstruct your

my external storage have bad block If it has bad blocks you will need to format the drive. The process of formatting will identify and mark bad blocks as DO NOT USE.

drive block. The drive block is attached to the top of the spin tube-basket drive assembly under the inner basket. The spanner nut is under the agitator, locking the basket to the spin tube. The drive