Questions & Answers for: dot 3 hydraulic clutch fluid

...CLUTCH FLUID TANK OUT OF MANUAL TRANSMITION: CLUTCH FLUID TANK OUT OF FLUID... WHAT KIND OF FLUID DO I NEED? A hydraulic clutch takes DOT 3 brake fluid. clutch in your vehicle uses brake

what kind of fluid does my 1994 toyota paseo clutch system take Hello. All Toyota vehicles take standard brake fluid for the clutch hydraulics. Hydraulic clutches take DOT 3 brake fluid usually.

DOT 3 brake fluid should be added to the system. If the fluid level drops, inspect the system, including the slave cylinder, for leakage. A slight wetting of the slave cylinder surface is normal. Fill

can I use dot brake fluid for my clutch yes,it's the same hydraulic fluid. TIM......... Yes, Dot 3 brake fluid is used for the hydraulic clutch.

...DOT 3/4 brake fluid to the high mark. The exception would be if they recommend DOT 5 , which is silicone and will not mix with DOT 3/4. Do NOT add brake fluid to the clutch reservoir. The BMW clutch ...

...packing inside. You may have a hydraulic clutch that actuates it, and that takes brake fluid. On the resevoir cap lists what kind. (DOT 3 or 4) This system is like a minature brake system,

...in hydraulic clutch system It uses DOT 3 or 4 type brake fluid. the clutch uses the brake fluid reservoir for its fluid, follow the clutch slave cylinder line and it will go to brake master

...nissan maxima? What kind of hydraulic fluid do I put in my 1991 nissan maxima? Hi Kelly,use dot 3 or 4 for your brakes and clutch reservoir,if you have a manual transmission.I use dot 3 on my Nissan

...DOT 3 brake fluid as necessary. Leave cap off. 2. Raise vehicle on hoist. 3. Remove bleed port protective cap and install suitable size and length of clear hose (4) to monitor and divert fluid into ...

...Clutch" If it's a hydraulic clutch, there will be a small reservoir that users dot 3 break fluid. Also there should little to no play in the pedal, along with a slave cylinder underneath the