Questions & Answers for: Nissan diagnostic fault codes

...fault Check engin light came on, had a diagnostic run on the car and they came up with a few codes one was a dealer code U1001 which is a communication circut fault. after calling the dealership they ...

U1000 Diagnostics check pop-up U1000 is a CAN Communication fault code. it is a code that most nissans have that cannot be cleared. does not indicate a fault with any system. if that is the only code ...

...diagnostic plug The trouble codes that are required by law on all OBD II systems are "generic" in the sense that all vehicle manufacturers use the same common code list and the same 16-pin diagnostic ...

diagnostic trouble codes p 1021 nissan navara 2010 Nissan Navara net View topic Fault Code P1021 Nissan Navara net View topic Got fault code P1021

...result, have it on a fault diagnostic machine, which will generate a fault code of whats wrong. saves paying out for things that are not at fault. hope this helps and if you need any more info just ...

...problems. What must be done now is to have the PCM scanned for fault codes and then based on that info a trained tech will perform the proper diagnostics to discover the problem part or

Fault From BCM 940.......No CCD Bus Message From PCM After diagnostic code display ends, instrument cluster will go into each of the following tests in order: Dim test. Calibration

...fault, and an associated trouble code, or at least a pending trouble code, has been stored in memory. All you have to do is plug in a code reader or scanner into the diagnostic port under the dash, ...

...start back The first thing you must do is have the engine control computer scanned for fault codes, once you have the fault code or codes you can do the diagnostics to find and resolve the

...diagnostic codes which can help you narrow down the problem. In your case, two current fault codes and two pending fault codes were recorded. The current fault codes point to a system that is running ...