Questions & Answers for: Plymouth Neon diagnostic codes

Question about 2000 Neon

1 Answer

...you trouble codes in the odometer area. After all the codes are displayed or if there are no codes it will say (done). There shouldn't be anything wrong with your car, it was just in diagnostic

Ad

i did a diagnostic test on my 2000 Plymouth neon and the code read p1390 what does it mean? and how can i fix it? the car is a stick shift so where would the crank sensor be located at in the car. ...

Ad

diagnostic machine. It cam back a cam sensor. Replaced the cam sensor, worked fine. The alternator went out on it, and my son in law's employee replaced it. now the problem is back! I replaced the cam

...panel not working. Heat works just fine (always has) also just replaced coolant temp sensor due to diagnostic code PO118. Yet the check engine light still on and the temp gauge still reads at zero ...

Question about 1998 Neon

1 Answer

evap code, but runs fine Did you get fuel and leave the car running? Check to make sure the gas cap is tight and take it off make sure there are no cracks where it would seal, if your not sure replace

...Diagnostic Trouble Codes list?Part 1.http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura_18.html --------------Diagnostic Trouble Codes list?Part ...

scan all of your computer modules and post any (or all) Diagnostic Test Codes (DTCs) that you get from any of the modules.  I can take the DTCs and walk you through the proper diagnostic routines

...codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT ...

Question about 2000 Neon

1 Answer

...codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT ...

...Codes do not indicate a part needs to be replaced . Diagnostic's for a code need to be done . Most all sensors can set 5 to 7 codes . Short to power , short to ground , open , low voltage , high ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...