Questions & Answers for: craftsman dlt3000

I have a dlt3000 18.5 intek. After 15-30 mins of mowing the engine sputters and dies. I can shake the mower erratically while it is starting to die and it stays alive, but as soon as I stop it dies. I

The dlt3000 mower won't start. I removed the fuel The dlt3000 mower won't start. I removed the fuel filter and it is fine. We turned it over and the fuel just dribbles out. Any ideas? Kevin sounds ...

Crfsmn DLT3000 w/18.5hp OHV Intek plus mower model 917.275810. When starting motor won't turn over. It turns till meets pressure and then bogs down much like a weak battery condition. Bought new ...

...DLT3000 blades won't disengage I have a Craftsman 18.5 Intek and the blades don't disengage. The top of the cable that secures to the handle is actually loose in the off position and not being ...

...craftsman Dlt 3000 riding mower with a 20hp kohler v twin . engine starts and runs for 5 seconds and shuts off no model # on my DLT3000. Replaced rear fender a few years ago where the model # used to ...

...Craftsman Lawn Tractor 20.0 Hp, 42" Mower Electric Start. DLT3000 Kohler V-twin check the solenoid on the bottom of the carb check for movement and power if it moves and has power open the carb ...

craftsman dlt3000 with an 18.5 intek ohv briggs. Just put a new battery in and still won't start. The wheel is not turning, just here a knocking noise, the starter and cable running to it I have a

craftsman dlt3000 with an 18.5 intek ohv briggs. Just put a new battery in and still won't start. The wheel is not turning, just here a knocking noise, the starter and cable running to it get very

...craftsman dlt3000 riding lawn mower,I replaced the deck belt,and every since I replaced it the blades are staying engaged,is there supposed to be some kind of springs on the idler pulleys The drive ...

...DLT3000 Craftsman mower Need the wiring diagram from the key switch to the going to the starter solenoid to the starter See owners manual. Free download at ...