Questions & Answers for: converter charging

Honda Accord 1989 part that converts ac to dc What is the part called that converts AC to DC to charge the battery when the engine is reunning? The alternator. It should produce 13.5-14.6 volts DC ...

RCA STB7766G1 Converter Box not working with Comcast cables I have Comcast cable TV. I have 8 TVs. 1 with Comcast On Demand. 2 with Comcast converter boxes. 5 others with RCA converter boxes. The RCA ...

UPS won't charge through a voltage converter When I connect the UPS to a voltage converter (220v to 110v) the UPS won't charge. The "wire fault" light doesn't come on and all appliances seem to work ...

1989 Chev PU , Aircon Dead , Want to Convert 1989 Chev PU , Aircon is going Dead , Want to Convert SYSTEM from R11 to R134 ? How can this be done with one of those conversion Kits ? can the evacuated ...

I need help converting my charging cable into a data cable to upload my photos that are on my samsung alias. I don´t think your charging cable can be converted to a data cable. You can send your ...

...converter to the PC/AV terminal on the camera. 3. Insert the other end of the AC power adapter into a wall outlet. The status LED lights green when charging is started and lights off when charging is ...

why would my 120 converter not keep my batteries charged while plugged in? If you are referring to a 12V DC - to -120V AC converter, then the answer is obvious. The converter makes the AC from the DC ...

...converter clutch solenoid valve circuit poor electrical connection P0562 charging system voltage low Possible causes Low battery charge Defective battery Faulty alternator Problem with belt Open or ...

Converter constantly running. Checked water levels in batteries and added about a pint to each. Converter still running. Battery indicator says full charge. Could the batteries be bad? have the charge

...converter does not seem to be charging DC batteries When plugged into shoreline converter is not converting to 120 only to outlets in camper. Converter is brand new make sure dis connect is on and if ...