Questions & Answers for: cold room

Question about DPAC9031 Silhouette 9,000 BTU Portable AC Air Conditioner

1 Answer

...room air over cold so moisture condenses. But other dehumidifiers mix warm air from the compressor with the cold(dehumidified) air that blows into the room. The DPAC9031 instead exhausts the warm air ...

Ad

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

...only can i move my wd64 (washer dryer) to my utility room that has a cold water feed only? i don't see why not, you only be able to wash in cold water and i hope u have a drain and power in that

Ad

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

...cold. It was working but now its just room temperature inside. The freezer part works fine the refrigerator part isn't getting cold. it was working but now its just room temperature inside. the ...

Question about Pinguino PAC-290 Air Conditioner

1 Answer

...cold air but the room is very hot the fan is blowing out cold air too it is not cooling the room down. sounds like it does not have enough BTUs so many BTUs can cool somany cu-feet if sealed space ...

Question about Pinguino PAC-290 Air Conditioner

1 Answer

...room very cold. It is a whirlpool freezer and is 15 years old. do we need to buy a new one? No refrigerator/freezer can make a room cold unless it vents the heat outside that room. If yours really ...

Question about Pinguino PAC-290 Air Conditioner

1 Answer

...is in a cold room is it possible the room is to cold and problem with thermostate? It could be a compressor problem, or the cold control. If your room is above freezing, the freezer should still

Question about My First Chemistry Kit

1 Answer

cold unless the room were heated! 3) water at 50c Most folks would feel quite hot while in the water at this temperature. And after exiting the tub, since the layer of water on his skin would probably

Question about 105Se Thermal Printer

1 Answer

...printer senses the outside temperature of the room and will give this error when the room temperature is cold. If the print quality is affected, you may need to relocate the printer to a warmer

COLD on then water is room temp when set on HOT. COLD turned off at valve and water is HOT when set on HOT. Checked screens. Mixing valve? or board? Sounds like hot and cold hoses are reversed. switch

...room too cold and not serving others well. Total number of ports served is 27 in 5 rooms. Is there any harm in blocking some (or all) of the ports leading to the too cold room in hopes that more cool ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...