Questions & Answers for: Frigidaire code f9

code F9 I start the self clean, and it shuts down and flashes code F9 Lock motor relay watchdog is active when it should be off Microprocessor checking the operation of the EDC lock relay after self ...

...F9 error code won't stop what can i do F9 code: An F9 code indicates the EOC has detected a problem with the motor door latch assembly. Check the contacts of the lock switch, wiring to the lock motor ...

...code F9 I started a self-cleaning and decided after an hour it was taking to long so I cancelled the clean. The door is locked and it continues to beep and flash code F9. Tried to unplug the stove to ...

-F9- Clean Frididaire Gallery Series F9 code means Control has detected a problem with the motor door latch assembly Soultion: Check wiring, replace the motor door latch assembly if necessary

...F9 code indicates there is a problem with the door lock. Try disconnecting the power to the range for 10 seconds and reconnecting. Open the oven door and hold the door switch plunger in while you try ...

code F9 door wont lock Hello there: F9 Problem with door lock circuit such as pinched wire between Electronic Range Control (ERC) and door lock switch Check wiring and test operation of switch replace

code f9 on frigidaire self cleaning oven. what does it mean. i went to clean the oven and the door locked and the code f9 came up and keeps beeping. i unplugged the stove for 1/2 hour and plugged it ...

...F9 error code blinks. cant open the F9 error code means that you have a problem with the door latch assembly in your range. The specific technical information on this failure in your model of ...

...code f9 will not go away and let oven work is there some thingi can do I appreciate your inquiry, friend! Based off the information you have provided your range is displaying an "F9" error code. "F9" ...

...code F9, a flashing lock light, a continous beep and a dr code on the panel when I try to set self-cleaning cycle again. Model : CFEF372CS2 Serial No: NF42412928 Thank you for your inquiry, Lucie! ...