Questions & Answers for: check cable connect ion

...check next? The problem is most likely on the transmission range selector switch, this is on th top of the transmission and has a multi-wire connector going to it, a shaft goes through it and the ...

Ad

Question about 2003 ION

1 Answer

...it did occur a couple of times in late summer/early fall. Take the car in, and have the fuel pump checked, and maybe the alternater. Something in there is going out. Could even be lose battery ...

Ad

cable matics.unless its true there is rust,if you can the rust then clean it with breakfluid and try connecting again.if not take it to gaurage they must recheck electric wiring system trace the wires

...Saturns for 13 years and never had that problem.Unless car has ground problem.Check cable connections at battery in truck,look for corrossion.also check cable connections at underhood jucktion

the volume coming from the stereo is very low. what gives? Check the preamp switch. some have a built in preamp which may be needed when connecting to some equiment If connection via PHONO cables to a

ion my door locks and trunk pop wont work. The keypad nor the inside button doesnt do anything. You can hear the clicking sound when you hit the buttons, but nothing happens. I have checked the relays

...Check the Manual User?s Guide Hay Don't worry it will work Note: Some low-power USB ports may not be able to provide enoughcharge power. Also note that rechargeable batteries mayeventually need to be ...

Question about 2.5" Hi-Speed USB 2.0 ION Drive II GHD225U80 80 GB Hard Drive

1 Answer

...check also Disk Management while your HD is connected to the your computer. First, if you can detect the HD in your Device Manager but not under the Disk Management, then the IOGEAR Tech Support is ...

...to turntable,does recognize device or usb malfunction .it's not the cable its a driver issue. try to connect it to another unit that is using another os, or check manufacturer site for driver ...

...check the connections to the starter motor. With each cable, grip it and move it back and forth; it should not move. If it does, there is your problem. When you start your vehicle with a loose ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...