Questions & Answers for: Nissan Altima change ht leads

1988 nissan altima when i start the motor it starts to shake then it shuts off how can i solve this problem? HT lead or the timing might be the cause

...HT leads (going to the spark plugs) - Bad cylinder compression (compression test will confirm this) - Leaking head gasket (this can also cause bad cylinder compression) - are you losing coolant from ...

...fuses or the LT and HT leads to see they are all good?? If not that is a good set of issues to check first.. Please let me know how you get on as these are just the first things I would look ...

...ht coil and the pick-up coil with new ones, turned the key, and it fired once, then nothing. The check engine light stays on. How can I extract the fault codes without an OBD2 reader? Is it possible ...

ht leads going to the spark plugs. spray liberally with water repellent (WD40 or simillar) and try again. one way that can usually locate the problem is to wait until dark, then have someone crank the

the battery.. One on  negative one on positive. touch the leads from the motor with the leads from the battery. reversing the positive and negative leads, change the direction the motor turn

The timing belt and the computer are good too. could be the coil if you have no spark. follow the HT leads they will go int a small box, that is what turns 12v into the high voltage to make the spark

...spark plugs, and starter. The starting fuse is good too at #26 location. It gets fire when turning the engine over. Battery tests good. Dpn't know what else to try. Did you change the

about Nissan Altima stuttering engine stutters when running run the fault and look for random misfiring check HT leads, coil packs and injectors and fuel pressure for the injectors.

...change now i am lost please help. Try the HT lead on that cylinder by starting car in the dark and look out for spark coming out of that lead while running. Or get a spare lead and replace on that ...