Questions & Answers for: Chevrolet Corsica change ht leads

...leads (get them changed) and on to the ignition coil if there is no spark coming out of it. In case of fuel, the carb needs a clean and a good carb cleaner or fuel treatment (added to the fuel tank) ...

Ad

Question about 1994 Corsica

1 Answer

1994 chevy corsica would'nt start? car at first tried to start it sound like it is out of gas,but it is not because it has gas in it. Could it possible be the battery or fuel pump please help me? ...

Ad

...change the leads for the sparks may have bad control module or fuelpump, need to check for spark and fuel ,remove a plug wire at coil and have someone crank engine watch for sprak coming out of ...

...under acceleration, and sometimes back fires. check timing belt thats it lined up ok ,change the plugs and leads and if no better ,remove the head and grind the valves in ,checking the valve ...

...was fine one day acted up some the next, now its doing it all the time plugs and leads ?? change them first ,right this is last question tonight because er indoors moaning iam spending too long on ...

Question about 1993 Corsica

1 Answer

fuel pump runs with 12 volts at test lead, once car starts and runs it stalls, then fuel pump will not run until is sits for about 30 min, then will run again with 12 volts to test lead Sounds like a ...

...HT leads) marking the cap as you go, ie, a,b,c,d or a number sequence your choice.. Remember, doNOT remove all cables at the same time. Change out one at a time, and you will not mix up the firing ...

...ht cables wel, run the engine, if there is no change try pul out one cable at a time n replace while engine is running 2 acertain the actual faulty plug by listening 2 sound variations, try n replace ...

Question about 1996 Corsica

1 Answer

2003 Suzuki XL-7 code po300 Service engine soon light came on, checked for codes, P0300 came up, where would you start for repair? It is detecting a random misfire, you may have some leakage in your ...

...a 1996 chevy Corsica with a code PO300.I have tried many repairs and still cannot repair this code changed spark plug,wires,motor oil,ignition coils all three,crank sensor,cleaned throttle ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...