Questions & Answers for: change ht leads Cars & Trucks

...HT leads broke, I phoned the RAC they tried to fix it (by repariing the broke ht lead), however the car wouldn't start correclty, the engine made some strange nosices then stopped. Next day I got a ...

Ad

Question about 1995 Contour

1 Answer

...ht leads try turning the engine over in the dark looking under the bonnet to see any sparking on ht leads get someone to turn over the engine while you look if you see sparking chang the leads they ...

Ad

Question about 1989 Camry

1 Answer

...or arcingit could just dampness cut the tips out of a rubber glove thread the leads through the wrist part will fit over the distrubuter that should keep the damp out outherwise change all ht ...

...might be popping off, causing it to not fire on one cylinder. I always change the plugs and leads at the same time to keep them the same age. HT leads break down rapidly and need regular

...HT leads) marking the cap as you go, ie, a,b,c,d or a number sequence your choice.. Remember, doNOT remove all cables at the same time. Change out one at a time, and you will not mix up the firing ...

Question about 1995 Corsica

1 Answer

...means that you have a broken lead and is earthed with the metallic cover. Shortly you will have unsteady idle and engine running due to this. Change your HT  leads as soon as

Question about 1995 Grand Cherokee

1 Answer

...change them and before start check by leaving an HT lead off a spark and use one of the old ones connected to the HT lead and earthed to the engine,ask somebody to start the engine checking for any ...

...ht leads coil pack and crank sensor but still no spark 2004 ford focus 16v zetech no spark at all crank over no problem .i have changed the coil pack ht leads and crank sensor but still no spark at ...

...check the distributor cap and rotor button for shorts /cracks and cleanliness. If you have changed the HT leads then check the firing order . Check the HT lead from the coil to the distributor

...HT leads ,moisture in the circuits and injector problems including low fuel pressure. use HT lead bridges to stop leads touching each other, clean out the interior of the distributor cap. ensure that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...