...vtx 1300s will not turn over i have changed out the battery and checked out the kill switch and still nothing when i push the start button the head light goes dim but nothing else starter solenoid ...
...change the starter on a vtx 1300 I dont have a manual yet and am afraid to pull it off I dont know if its chain drive and parts will fall in the case I will let you know in the morning because I am ...
...change,still bright,trouble is bad starter,or bendix or solonoid.Starter is not requesting power so lite stays bright.Don,t forget to check ground wires at battery and frame.You changed battery check ...
...circuit. most likely u have cut or broken wires in the housing were the switch is. if u made any changes at the bars or housing it is easy to pinch
...and the starter wants to drag are hang til release button and try again.cuts off with loud clack changed battery good volts drops from 13.4 to 11.0 It sounds like you have a short in the starter. ...
...change it? Hi, Sami before you can diagnose any electrical component in the Starter Circuit it is "IMPERATIVE" your battery must be fully charged to 12.5 volts or more and be able to pass a proper ...
...change starter switch on Honda VTX 1800 C year make 2003 There are 2 screws on the lower part of the switch housing, remove these - keep track of each as they are different sizes and must be put back ...
Question about 2005 VTX 1800
...Honda VTX 1800 doesn't start, changed battery no help. Neutral light goes out as soon as I hit the start button Hi, Pat and the usual suspects are: 1. Ignition Switch not in the "ON" position. 2. ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions