...PIXMA MP470 U1.2 So, is that the right driver or do you have one that will work with vista in a Dell INSPIRON - 530. BOB MALLORY [email protected] Canon 470 printer scanner stopped scanning, ...
...canon mp470 print head when I just insert a new cartilage. No matter what I do, the printer error stating I didn't install the print head. Perform these steps and reset the EEPROM: Service Mode This ...
...Canon Service Center with no luck. 760-345-4347 [email protected] Need this unit desperately for work. I am an electronics technician if you can tell me how to do it. Please do not delay - ...
Question about PIXMA MP530 All-In-One InkJet Printer
...Mp470 all in one printer, copier and scanner. I can not print because I can not get it out of the copy mode. How do I change it back so I can print? This may sound stupid, but I have tried everything ...
...canon mp470 printer is stuck in copy mode and won't allow me to print anything. How do i undo this? If I need to install new drivers how do I do this and how do I know which drivers I already have? ...
canon np258 cant operate after refill You may need to reset the ink counter. Try one of the following solutions. THis is the procedure I used for an MP470. It is basically a modified version of that ...
Question about PIXMA MX350 Wireless All-in-One Inkjet Printer
Canon models. Try the top one first. This is the procedure I used for an MP470. It is basically a modified version of that previously posted for the MP460. 1. Disconnect the power cable. 2. Hold down
...canon mp496 printer.I print images and everithing is ok but the ink lamps are orange .I don't know what to do ! Please ,help me !! One of these reset methods should fix the problem This is the ...
...Canon pixma mp470:1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to ...
...Canon pixma mp470: 1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions