Questions & Answers for: cam sensor code 2002 saturn

Question about 1998 SL

1 Answer

...cam Hello DTC P0341 & P0133 very common saturn Codes.You need to check condition of Plugs & wires,If not New Replace All Plugs & Wires,also I would replace the #1#4 Coil for the P0341.For ...

Ad

...saturn twin cam starter removal i have a 93 saturn twin cam four door, im trying to remove the starter and have the bottom bolt off but cannot locate the top bolt manuel says the bolt must be removed ...

Ad

Cam position sensor problem. 2002 single cam engine, 132k miles, auto, starts good, runs good, quiet running, engine light ''service engine soon'' on, and code ''cam position sensor'' error. Thank you

Saturn 1.9L motor, both Single overhead cam, or Twin cam is as follows: Left to right 1-3-4-2 If you are routing spark plug wires, and need to know the order of wires from the coils to the engine, the

can you tell me the order of installation for spark plug wires on a 2002 twin cam saturn sl1? just enlarge this diagram and you can follow the wires whre thry go

Question about 2002 Sl

1 Answer

cam sensor iis there another solution that it could be i cant find a cam sensor anywhere for my car Which saturn is it - what motor? I have some saturn parts for S series single and twin cam. My Email

Question about 2001 S-Series

1 Answer

...cam, do you think this also affect why car still wont start Alot of the time the anti theft security can actually disable your starter. Check to see if there is a light on the dash that says SECURITY ...

Question about 2002 Sl

1 Answer

...cam. car wouldn't start intermitally . couldn't hear fuel pump humming so i replaced w?new one.It ran good for two days then problem came back. Pulled pump out and it works fine, the fuse is ...

...saturn sl2 with a 1.9 motor my ? is which motor is better a1.9 single over head cam or a twin over head cam 1.9 motor which would be better to put back in the car? which motor is better twin overhead ...

...sensor A so by banks I take it that it is the LH cam (from front of engine) bank 1 and RH cam is bank 2 correlation means that both cams have to read at the same time to indicate a cam has not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...