Questions & Answers for: cable antenna

Question about 1993 Corvette

1 Answer

antenna cable via the same route followed by the original antenna cable on up to the hole in the fender in which the mast will be mounted. Step 8 Ground the ground lead from the motor to a clean metal

Ad

...ANTENNA MAST DRIVE CABLE IS BROKEN, EITHER REPLACE THE ANTENNA OR THE DRIVE CABLE, CALL THE DEALER TO SEE IF A ANTENNA MAST KIT IS AVALIABLE FOR YOUR CAR, MUCH CHEAPER THAN A WHOLE NEW ANTENNA.. time ...

Ad

...antenna cable to remove this unscrew the washer nut at the base of the antenna and turn radio on antenna should push up and play out he cable to replace insert new cable and turn radio off it will ...

Question about 1996 Accord

1 Answer

...antenna cable via the same route followed by the original antenna cable on up to the hole in the fender in which the mast will be mounted. Ground the ground lead from the motor to a clean metal ...

...antenna cable at the radio by pulling it straight out of the set. Depending on access, this may require loosening the radio and pulling it out of the dash. Working under the instrument panel, ...

...antenna cable. Now inside the car pull on the old cable until the new cable reaches the radio. Plug cable into radio then hook up the hardware on the fender for the new antenna and you're done. Good ...

Question about SyncMaster 2333HD 23 in. LCD TV

1 Answer

...Cable or Antenna. If you have rabbit ears or and outside antenna then set it to antenna. If you have cable then set it to cable. Then rescan for channels. If this has already been set then the next ...

Question about 1991 MR2

1 Answer

cable with teeth. The antenna motor turns a gear which drives the cable in (mast down) or out (mast up). These cables do break. You can buy a whole new power antenna assembly or just the plastic cable

Question about 1991 MR2

1 Answer

...antenna cable to the radio is the only wire on the antenna. To replace the antenna, you have to remove it from where it connects onto the car, then lift it out from there. The antenna and the cable ...

...The model number is Dp19640 There is a threaded connector marked cable/antenna. You use this connection to attach the antenna cable. Then you do a channel scan with the tuner set to antenna not

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...