Questions & Answers for: Jaguar XJ8 bush how to

removal and replacement of lower shock bushing while still on car? Burned out the old bushing, cleaned up the shock mount and pressed in the new bushing using two 1 and 1/4 sockets and a bolt and nut ...

rear bushes making knocking sound when driving was told whole suspension had to be lowered at great cost.could you tell me if this is true.also sometimes wont start have put oil down plug holes then ...

Transmission clonks into drive ocassionally Hi there, I recently brought a 2001 xj8 exec, it is in suberb condition and low millage at 68k. It has started to, for want of a better description clonk ...

Thumping Sound not from Engine. My 2001 Jaguar XJ8 makes thumping sound from the front end when I hit a bump. Car has 88,000 on it. A mechanic told me that it is the bushings that need replacing. How ...

...like the rear near side (uk) it does not appear to be the exhaust or any loose tin wear....would a bush sound so tinny if so does anyone know where to start..i belive it had new shocks fitted about

got a knocking noise at the back when i go over bumps Could be a bad strut/shock.. Please dont forget to rate well ;o) Hi I'm litoshop must likely you could have a bad shock or stabilizing bushings ...

I have knocking noise from car when driving on uneven road surface. I suspect front wishbone bushes? could be shock absorber rubbers Could well be the Anti Roll bar bushes. Very common and a cheap fix

...the swinging movement and manily on the left hand side (in the gutter ) as they call it, and its a bush that only moves once in 50 bumps and its not the thing you can see but if you remove the l/h/s ...

I have a daimler super v8 1998 had new shocks at the front and ball joints, new set of p6000 tyres but ride is very hard would new bushes cure it? no you have europeon shock absorbers ,if it is too ...

I have a 98 xj8 and it has been stood for 4 years so I have just replaced all the brakes and front suspension bushes. On the bottom wish bone there is a dot and a line for setting the position of the ...