Questions & Answers for: Geo Tracker bush how to

Ad

my bushing is worn on my clutch release fork in the bellhousing of my 1991 geo tracker how do i replace it where can i get parts its causing my release bearing to jam when i push the clutch any help ...

Ad

I have 2nd 4th and R no 1st 3rd or 5th, replaced the bushing at the bottom of the gear shift, no change, wondering how hard it is to take out shift assembly with out raising the truck or dropping the ...

Ad

Question about 1995 Tracker

1 Answer

wheel bearings front replace remove the wheels and then remove the hub covering and you will see a large bolt with a cotter pin, remove the cotter pin and the outside bearings will come out remoce the

Question about 1995 Tracker

1 Answer

its the shift stick it very wobblyand hard to change gears SOUNDS LIKE IT WORE OUT.......NEEDS REPLACE.OR A NEW KIT BUSHING AND WASHERS.......

Question about 1992 Tracker

1 Answer

clutch is hard to push in,the cable is o.k. the cross shaft seems o.k. bushings under clutch peddle under dash o.k., but when hooked up to Bellhousing, cable creaks. may be binding in the clutch fork ...

Question about 1995 Tracker

1 Answer

remove rear axles bushings bushings, there are no bushings. (bushings are baby buggy?? LOL) my guess, is you mean rear axle bearings? and seals. here iit is ...

speedometer makes noise when cold. how do I lubricate where the cable and speedometer connect? old post http://www.fixkick.com/sensors/speedo/unsafe-at-any-speed.html#noise well , if the head makes ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Tracker
1995 Geo Tracker

343 Questions

1993 Geo Tracker
1993 Geo Tracker

207 Questions

1992 Geo Tracker
1992 Geo Tracker

189 Questions

1994 Geo Tracker
1994 Geo Tracker

185 Questions

Manuals & User Guides

Loading...