Squeaky Front end on 2003 Buick LaSabre When I drive or when I Push the front of the car up and down there is a squeak and it sounds like it is in the Rubber bushings in the SPINDLE or WISHBONE, The ...
control arm bushings the bushing for the left control arm needs replacing on a 2000 buick lesabre custom, are there any special tools needed to do this job, is it easy enough for your average dummy to
My mechanic told me that the bushings that hold up the subframe are showing signs of cracking. He said that since the steering column is attached I would lose control if the bushings broke. Is it ...
2002 front stabilizer The rubber bushing is worn out and the entire aluminum stabilizer has to be replaced ? Can just the ruber be replaced? How to do this? do not replace the bar please only if its ...
my defroster makes a rattling noise on high speed could be leaves in the fan getting through the wiper vents or surrounding areas over time and the heater fan needs to be removed and cleaned out....or
need to replace the bushing on the subfram(dogbone)notice that one of the holes is alittle rounded. will Need to replace that frame or will the new bushings be all right in the worn holes? replace ...
Auto parts place says I need the rear sway bar replaced - is this the same as the links and bushings? It's a bar in the middle of the car that leads to both wheels in the rear. If it does need to be ...
on the a-frame of passenger side there is a black bar that comes off of it and its missing what seems like a bushing and bolt because it's not connected, what is this part so i can get one that ...
how to replace control arm bushings Do you have to replace the entire control arm when bushings wear out Yes it comes as one piece.
i have a loud grinding noise on the undercarriage of my car and I have discovered that the noise is coming from the bushings that hold the frame under the engine and transmission. What is that part ...
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions