Questions & Answers for: broken shaft

...shaft has broken. Have you had the shaft off recently? If so, take the shaft off again and try to seat the shaft as you gently pull on the rope. If you need further assistance, just let me know. Jim ...

...shaft has broken. What is the fix for this? Thank you, If the main shaft were broken, the entire agitator assembly would come out. Usually, there is a plastic adapter that goes from the shaft to the ...

shaft is broken inside the pump you won't have any assist. I've fixed two so far this winter for this same problem this winter and both were on vehicles that were stuck or ran off of the road into the

...broken piece of the oil pump shaft is still lodged in the distributor drive socket you may have to remove the distributor to remove the broken piece. Normally there is no retainer keeping the shaft ...

...shaft. Look for a broken rubber boot on the shaft that runs from the transmission housing to the wheel hub area of front wheel. If you find a broken or cracked boot then most likley the **** needs to ...

...in the gearbox at the end of the shaft, or the shaft has broken, remove the gearbox from the end of the tube and see if the shaft is rotating when running the engine, if not the shaft may have

...broken drive shaft. Some are braided and flexable and used on curved shaft units. The solid shaft is used on most straight shaft units. Remove the string head and pull the shaft out to look at the ...

...shaft broken I have a broken kickstarter shaft and would like a walk through on replacing the broken shaft. Thank you Hi, Anonymous for this scenario you will need your service/owners/ manual if you ...

...and belt), but the shaft is still not turning. The company website appears to be offline. Dont know much because it is not a US company. It could be a shear bolt in the shaft that is broken off.