Question about 1993 Camry V6
brake w/ lights on. When I turn the lights on, every light including all blinkers, the hazard lights, bright lights, dim lights and all tail lights are working. While all lights are on, the left brake
...brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next? WITH A GOOD FUSE TESTER, TEST ALL THE FUSES ...
...brake lights not come on,but allow 3rd mount light to come on? i've checked the bulbs,sockets,fuses. now i'm stumped. THOSE LIGHTS ARE ON 2 DIFFERENT CIRCUITS. ONE WHITE WIRE COMING OUT OF THE BRAKE ...
...lights and BRAKE LIGHTS NOT WORKING It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case. ...
brake lights i have third brake light and rear turn signal and both bulbs are new tested brake light circuit with a test light and nothing happend third brake light is on a different circuit than rear
Question about 1990 Suburban
Brake Lights and Turn Signals. The Blinker switch on steering column is broken, other than that everything is fine. Again all lights are working except for brake lights and turn signals. I am going to
Question about 2000 Focus
brake lights Since the turns work in the back, that means the brake bulbs are good. Brake lights and turn signal lights share the same filament in the bulb. There is a fuse for the brake lights. Then,
...brake lights in my 2007 E-150 van. I replaced the pedal switch after checking the light bulbs, everything works: turn signals, hazard lights, tail lights but not the brake lights. I thought may be ...
Question about 2007 Ram 3500 Quad Cab Laramie
...brake lights The high mount brake light gets its own signal from the brake light switch (on the brake pedal). Or at least the wire leaving the brake light switch will splice, one wire to the high ...
Question about 2007 Ram 3500 Quad Cab Laramie
lights or brake lights working? Changed multiswitch change brake light switch still no hazard lights or brake lights fuses are all good where is the relay Brake lights /rear hazard lights not working
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions