Questions & Answers for: brake light switch subaru

Question about 1996 Legacy

1 Answer

...brake light Just took my Subaru for a Warrent and it failed again.... The hand brake light stays on on the dash. Have cleaned the switch but it seams to be earthing somewhere. Any ideas on how to fix ...

Ad

...brake light switch? PS: this legacy has cruise control, so the BL switch manages that, too. simple test light to the stop light switch mounted just above the brake pedal. power in one side push down ...

Ad

...lever when you put on the brake it moves away from the switch causing it to turn on a light. i just purchased a 1993 subaru legacy my running lights are not working?? i have checked all fuses??

...ON AND THE INDICATORS BEEP WHEN FLASHING up buy the pedal is the switch push it toward you to adjust chang flasher pole up brake pedal poll up emergency Brake pedal follow brake peddle arm up to ...

...self and now my brake lights wont turn off unless i disconect the battery. The brake lights switch is located on, or activated by the brake pedal. Seems it needs to be adjusted or replaced. Good ...

Question about 2002 Impreza

1 Answer

...The brakes were turning off when I pulled up on the brake pedal. Does this mean it is the switch by the pedal? Yes, the lights of the Subaru Impreza 2002 light on when you pull up on the brake ...

...or the brake relay switch? The brakes were turning off when I pulled up on the brake pedal. Does this mean it is the switch by the pedal? yeah, it's the brake light switch (just above brake

Question about 2001 Outback

1 Answer

subaru brake lights not working First check brake light fuse. If that's good. replace brake light switch. It's mounted just above brake pedal under dash.

Rear brake light aren't working subaru legacy 2004 Rear brake light aren't working subaru legacy 2004 Check the bulbs, if they are OK you may have a faulty brake light switch.

Brake light switch replaced 1 yr ago What else can I try. Mr. Williams since you tried with fuse,bulbs and brake light switch with no success,why you do not try to check your circuit by using a tester

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...