Questions & Answers for: brake light switch 2000 jeep grand cherokee

...fuse. I removed the stop light switch but it has 6 pin connectors and I do not know what to jumper to check brake lights. if you have a park light working change your stop light switch it is

...continues even when I take the key out of the ignition. Check the brake light switch, located under the dash above the brake pedal. The other noise may not even be related to brake lights staying ...

...I do not see a fuse labeled brake lights. There was one labeled brake switch which I tested and it is goood. Any other suggestions are appreciated Sounds like the stoplight switch on the brake

...Even when the car's not running, if it's in park, in drive, no matter what... The brake light switch is defective or out of adjustment. More than likely located on the brake pedal arm near the

...on the right side. you can test it by exchanging tail light for brake light socket and if that works you know it is the socket Check brake ligt switch, generally located top back side brake

My tail lights will not turn off 2000 Jeep Cherokee brake pedal switch top of brake pedal stuck tap with screwdriver if that dont work replace brake light switch hope this helps

...Maybe didn't install the bulbs tight back into the asm? No brake lights...do the lights work with headlights on and just no illumination with the brake pedal depressed? Could be brake light

...right and left brake lights wont work. new bulbs, new sockets (grounded properly) new fuse. hatch brake light works. what else could it be? i could be the brake light switch at the brake ...

No blinker or brake lights on a 2000 jeep cherokee Blinkers and brake lights don't work but the hazard lights do work Switch unit or fuse browned

...no brake lights, and you've checked the fuses and the bulbs then, the problem is likely a the brake light switch on the brake pedal arm. The switch needs to be adjusted or replaced. Hope this