...line for the back seems to be stuck, make sure it's tight on the handle bar and the brake in the back is not overly worn or too tight. If the problem presists try replaceing the pads and brake
...brake handle going up releases the switch and then presses it back down when you put the brake handle down, 9 out of 10 times the switch gets pushed to the side or broken so when you put the brake ...
...brake handle if you can. on most cars there should be "teeth" that engage on another set of teeth. the "button" at the end of the handle should be spring loaded-when you press the button,it releases ...
get the brake to release to put the cover back on? Most dealers either have the tool or keep an extra handle in their shop just for this.If you can remove brake handle from saw use it to release brake
brake handle. The brake adjustment is a self-locking nut on the threaded end of the parking brake cable that connects to the left and right parking brake cables underneath the car. The only adjustment
Brake handle does not trigger brake light When pulling the brake handle my tail light does not light. The foot brake works fine as do all other lights. Any ideas? Brake switch needs adjusted out or ...
Question about 2005 VT 750 DC Shadow Spirit
brake handle pull the boot back theres a 10mm nut to adjust the number problem with these pull handle ebrakes are that people are always driving off without releasing the e-brakes and what happens you
brake handle about 8 clicks or about half way up now try pushing car it should not move if so then start car and place in drive it should also not move a standard just slowly release and see if engine
Question about 2002 L-Series
...ideas Soft brake handle with no brakes First make sure you have brake pads left! If you do you may need to bleed the caliper or have the brake assembly onthe handle bar cleaned. Very common
Usually answered in minutes!
165 Questions
193 Questions
115 Questions
114 Questions
96 Questions