Questions & Answers for: Chevrolet Monte Carlo blinker switch

Question about 2004 Monte Carlo

2 Answers

Blinker less in my 2004 Monte, Wayne On mine it was the unit itself. Change hazard/flasher unit on the dashboard. Unscrew screws at left end of dash, inside glove box, ( and panel below steering wheel

Ad

Question about 2001 Monte Carlo

3 Answers

...that there was a recall on this problem. What you can do to fix it in the meantime is when the blinkers stop working press the hazard switch in and out really fast and they will start working ...

Ad

Question about 1984 Monte Carlo

1 Answer

...carlo ignition switch u got to take off the stearing wheel and u got to take the blinker switch off witch is about 3 screws and u should b able to c the tumbler take the pin out then it should come ...

...replaced. With the blinker on, walk around your vehicle and check that the turn signals on that side are working properly. Then switch and check the other side. These bulbs are fairly easy to

Question about 2004 Monte Carlo

1 Answer

My blinkers and flashers have quit working completely. Both fuses are fine. All other lights work. Where is the flasher switch located? Could this be the problem!! The hazard light switch controls all

2000 Monte Carlo blinkers work some time have to tap /hit dash board by hazard switch to make them work. Control switch on heater blower not working light out. I have to put the fuse in on passenger ...

Question about 2003 Monte Carlo

1 Answer

my 03 monte tail lights an dash lights wont work -- brake an blinkers work -- bulbs an fuses are all good cant figuer it out any help would be app. ty I would start by checking the headlight switch on

...blinker assembly? try turning hazards on off n see that makes a difference if so u need new hazard because ur turnsignals are routed through that switch... if not most likely the turn signal stock is ...

...blinker\hazard switch in one. Turns out the ignition switch was going bad. The ignition switch finally went totally bad (no start some times). Changed it a couple of months ago. No issues with ...

Question about 2003 Monte Carlo

1 Answer

my blinkers aren't working,what do i do Ok the main cause of th e blinkers not working is the flasher switch . The flasher switch also works as a flasher relay. good luck !!

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...