Questions & Answers for: blender blades turning

...is slipping. Motor turns but the blade fails to turn gears and blade turns when there is nothing in blender. but when I try to blend anything in it, the motor turns and the blade is stationary. Is ...

the lights on my cuisinart blender come on but the motor just stopped working Using your blade holder, turn the motor from the blade end. 1 or two turns. Tak the blade holder out, Plug in an test ...

...m guessing I ran it too long without pulsing the motor and the heat corroded the rod that's connected to the blades. OR you can buy a replacement blade unit for about $10 online on a blender parts ...

Blades on inside of kitchenaid blender jar won't turn. The metal gear on the bottom of the blender jar rotates but does not turn the cutting blades on the inside of the jar. Can this be fixed or do ...

I am unable to remove the blade, what can I do the blade is a screw fit on the shaft of the blender,, if you only use one blade just rince the blade under the tap and dry it off before putting it away

...blades stopped turning in the middle of blending a batch of hummus Its is a Kitchen Aid blender about 10 years old Does the motor still work if you take the pitcher off of the base? If so, the rod ...

...part.. Are there instructions on how to replace the bearings in the blender? I have a Cuisinart SmartPower 600W blender that has a hard time turning and a burning smell when running under

blades supposed to come off when I take the container off of the blender.. My blender is brand new sat for 3 or 4 years after I bought it. . The first time I used it , it was extremely hard to get the

...blender container. the blades will not spin if there is anything in the blender container. they spin fine if its empty. This is not really the solution it is just a better description of the ...

...blades may not be turning because the blade assembly is not fully tightened onto the blender bottle. Another reason could be that you are not putting the blender bottle and blade assembly into the ...