...riding mower with no gears. I've been using it today but it now starts up ok but when I try to engage the blade the engine cuts out. Can anyone help me thanks if the belt on the blade deck starts ...
...riding lawnmower and we can't get the blades to engage it runs good but the blades just want turn Could be the spindles are seized. Turn the motor off and then reach in under the mower deck where the ...
Question about 34 In. Zoom Series Riding Mower
mower dies when the blade is engaged kawasaki 48" cut walk behind. Well first you should check to make sure that the blades move freely. While the engine is off you can (safely, with a glove) grab one
Question about 34 In. Zoom Series Riding Mower
...mower has a manual lever that has to be pushed up in order to engage the blades then check the tension pulley that connects to the lever cable on the top of the deck,it probably need to be lubricated ...
...riding mower that when i engage the blades the engine stops running Could be something jamming a blade or belt. With the engine OFF and the key OUT make sure the blades and belts all move freely by ...
riding lawn mowere starts to shimmyand make whirring noise when PTO is engaged. belt moves freely--does not shimmy or make noise otherwise I suggest that you inspect your blades, sounds like you have ...
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
ariens ezr 1742 blades stopped while mowing, belts is good, blades turn freely, motor runs and machine moves blades stopped while mowing, belts is good, blades turn freely, motor runs and machine ...
...spun by hand, the other blade fixed and wont spin at all by hand. So should the blades freely pivot and spin or should they not move at all? THAY SHOULD MOOVE THE ONE THAT WONT MOVE NEEDS ...
Question about 44-Inch 12.5 HP Trailcutter #RTB12544
not engaged it runs fine as soon as I engage blade it will not move jack up the mower and see if the blades will turn by hand freely. If hot you could have something stuck in there or a seized bearing
Question about 44-Inch 12.5 HP Trailcutter #RTB12544
blade engager) lever on craftsman riding mower 2000LT Lever is loose and does not work. Seems like something has come loose because the lever has no tension and does not engage the blades. Lever moves
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions