Question about CLP 300 Laser Printer
black ink smudges for color print mode only, not for grayscale When printing in color mode I get a vertical line of black ink smudge on the left margin of the page. I checked about cleaning toner ...
Question about Magicolor 5450 Printer
Black imagine unit,if needed change it. I've found these smudges to be caused by a build up of toner on the edge of the drum. Carefull cleaning with a lint free cloth sometimes cures the problem. This
faulty. If it is only black that smudges it is likely to be the K Developer unit. Ensure that you are using genuine toners, not refills or third party as the quality of toner can cause similar results
Question about Stylus CX5000 InkJet Photo Printer
...black smudges on my printouts. I using I have black smudges on my printouts. I'm using Epson Stylus CX5000 Printer. The color cartridges aren't smudging. Just the black. I've cleaned it several times ...
Question about Color LaserJet 2600n Printer
black ink smudges (1/32" wide x 1/16" high) in right margin Four small black ink smudges (1/32" wide x 1/16" high) are in right margin of all documents printed. Starting in upper right corner of page,
...black smudges I've uninstalled and restalled software. Swapped connection from USB to SCSI and reinstalled on another computer.... same problem. In black and white mode to scan with image size of A3 ...
gray smudge on edge of paper If you get only black smudge even when you're printing in color your problem is most likely the black cartridge. If it smudge in colors look at your transfer belt, open ...
...smudges in black. I have recalibrated several times. Printed at least 20 pages in black. I ran self cleaning several times. I have wiped the black film down on the front cover of the printer and I ...
...black smudges - not lines on copies, and not on all of them- inconsistant in smudges- have gotten a few copies that are ok and then it smudges again. I cleaned the scale, rollers, changed toner, blew ...
Question about Phaser 7700 7750 color laser printer Staple Pack 3 Re Refu
Black Smudges from Tray 1 MPT Getting black smudges all over the paper from tray 1 mpt. Tray 2 is fine. The smudges are fused. Dust, dirt, toner, in paper path, clean. -Carl
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions