Questions & Answers for: Zanussi black dust washer

Question about IZ12 Front Load Washer

2 Answers

Zanussi IZ12 Pumps, then Pause LED is flashing. Zanussi IZ12 washing-machine Pumps, then Pause LED is flashing. Machine NON operational then. Removing the Powercord for 15 min. lets the machine work ...

Ad

Question about ZWD1470W Front Load Washer / Dryer

2 Answers

...dryer does not start. Clothing gets caught in the front of the dryer as it spins. This is leaving black marks and wholes in our clothing. I have the same problem did you get it

Ad

Question about ZWF1640 Front Load Washer

1 Answer

...washer leaks only during the fill cycle, check these: Air-gap device -The air gap is a small device found on most washers that prevents the wash water from being siphoned into the household water ...

Question about FLA1001W Front Load Washer

1 Answer

...black. Grey dust usually comes from a loose concrete weight. Loose tub weights are rare on this model but they cause a loud knocking noise which is often worse when the washing machine is revving up ...

Question about FC1200W Front Load Washer

1 Answer

does not empty out water either on a program or when you put it on the Drain program. Macjine has not been used in over 12 months and was fine last time we used it Hi, You have not been using the ...

last load of washing has lots of black dirty marks on them The machine has been very noisy this las t few weeks, still spinning and washing ok. The washing completed this weekend has a greyness on the

Question about ZWF1440 Front Load Washer

1 Answer

black mould the mould is in the rubber door seal of the machine, and very hard to remove, have tried various detergents....what causes it ????? The machine is a Zanussi this is the fatal flaw of front

Question about FJS1225W Front Load Washer

2 Answers

black spots. thanks THE DRUM BEARING HAS GONE THE SPOTTING IS FROM THE OIL IN THE BEARING .IF YOU TURN THE DRUM WITH YOUR HAND IT WILL FEEL LIKE IT IS RUNNING OVER A COBBLED STREET BUY A NEW WASHER Hi

Question about ZWF10070W Front Load Washer

1 Answer

...washer. There are now black rubber plugs with white hard plastic inside still in place. I am not clear whether to remove these as well. If I don't remove them, I can't manage to fit the 'plastic plug ...

Question about FJS1225W Front Load Washer

1 Answer

Black bits keep appearing in washing machine and sticking to clothes, even after descaling and maintenance wash, how can I get rid of them? We were having a similar problem with our front loader. Have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machine Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...