Questions & Answers for: Leviton black box

...box has two black , white, red and groud wire. this room has two seperate light switches that control the light. Which wires go to which wires? When you take the existing switch out of the wall, the ...

both fhave two black and one green how fo you wire it up One black to incoming (hot) black wire, one black to out going black wire , green to bare ground wire in wall box or attach directly to the box

...black wires in the box. The timer has the green (that goes to the ground) and the White & Black and a Blue. Again, in the box, I have two blacks. What do I connect? You need to have a pair of ...

...black white and copper wires leave breaker box in a single romex cable. The romex travels to a junction box in the area where the lights are located. The junction box is usually a switch box or a ...

...box. Timer-black-wire connects to jacuzzi-black Timer-white-wire connects to ground. Timer-green connects to ground. Timer-red connects to jacuzzi-blue. B) Here's how to wire timer if 2 cables enter ...

black-wire and white-wire In back of box, the white wires are twisted together and covered with wire nut. These white wires are called Neutrals. Add your new white wire to these other white wires. The

...black wire (to the load) inside the switch box. The green connects to the bare wires inside the switch box. The yellow/red is not used in a single pole application such as yours. The two white wires ...

...box has 2 black, 1 red and 2 white What do you connect together? The best thing you can do in that situation is match the wire colors of the dimmer to the colors of the screw terminals on the switch ...

...box, and the other black wire goes to load (light, fan, motor) New device has black wire: connect this to hot from circuit breaker box. New device red wire: connect this to load wire New device has ...

...box that has one black wire and one white wire hook a black to a black and the white to the other black. What they did there is called reverse feed, they pulled power from light box down to switch on ...