BenQ FP676. The Power LED blinks / no image (backlight off) although I can see something being displayed when using a flashlight (image also blinks in the same frequency of the power LED). The fuse is
Question about FP71G 17" LCD Monitor
...LED & later it come back and the display show the Benq logo (as if we switched the power OFF & ON again). This sequence just repeat & the time between is not constant (it varies). Sometime a few ...
benq t701 there is power to the transformer circuits but there is no power led on and there sounds like a chirp every second from somewhere near the middle bottom of the power board faulty power board
...Benq PE8700 projector but when I turn the unit on the projector will not startup Also there is red led that is on (steady) located on the small PC board on top of the lamp power supply (back of the ...
Question about PE8700 Multimedia Projector
My benq w500 just turn on with 3 orange led and do nothing ... what is a problem? in manual 3 orange led means just plug..... power supply problem.
...Benq 567s lcd monitor does not power up. Switch led blinks but goes dead. Tried replacing capacitor 450v 82uf with 400v 100 uf but did not work. please help. That cap is for the Primary power supply ...
Question about PB6200 Multimedia Projector
...led turn on benq pb6200 with new bulb all I get is slight humming from inside with green control lights on but the 3 leds not on, took apart inspected main board and everything seemed ok, nothing ...
Question about PB6200 Multimedia Projector
...LED indicators, not powering up anymore Projector : BENQ mp610 when turn on lamp lights on and then when fan starts running , lamp goes out, no light on all LED indicators, not powering up anymore ...
Question about PB6210-DLP PROJECTOR XGA Multimedia Projector
hie can anyone help i havea dlp benq pb6210 is it possible to convert and install led https://www.instructables.com/id/Convert-A-Projector-To-An-LED-Light-Source
Question about PB6210-DLP PROJECTOR XGA Multimedia Projector
...LED indicator) blinking 2 times red. this malfunction described in the manual as a "Scaler shutdown fail" Presuming it is a Benq? Moved Question to Benq from Televisions category. Lots of references ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions