Questions & Answers for: Chrysler Sebring belle

crankshaft sensor i just want to know where it is located in my car engine on top of the bell housung unit under the batt compartment. it is black and held in by one bolt

Crank sensor and camshaft sensor Will someone please tell me where the crank sensor and the camshaft sensors are located?1998 Chrysler Sebring 2.5 v6 The crank sensor is in the top of bell housing of ...

seatbelt bell keeps ringing bell seatbelt bell keeps ringing bell It sounds like the sensor in the latch is faulty or the wiring leading to the latch is bad. The sensor will be located inside the ...

car wont start i would check the crank sensor it is in the transmission bell housing on the backside with the drivers tire removed you can look in and see it it is held in with a 10mm bolt

need to know the location of the crank shaft positioning sensor On The transmission bell housing towards the rear of engine.

does a 1999 sebring chryslers motor set sideways or straight? how to change transmission. Sideways, remove bell housing bolts, starter, tork converter bolts, remove CV axles, diconnect transmission ...

When shout i replace the timing bell, my card is a sebring 2010, V6. It has 14,710 milles. Thank your help. if you bought the car new If you look in the owners service manual that came with the car it

None of my tires appear to be low at all but the indicator light is on and the bell sounds every 20 or 30 seconds. Sight is not an acceptable way to determine tire pressure. The warning will appear ...

Touring. Why does seat belt bell ding even when seat belt is fastened? You start by looking at broken wire connection under seats, often times just unplugging wire connection and replugging works. ...

What is the location of the cam position sensor in a 2007 chrysler sebring 2.4 engine? Usually the crank shaft position sensor is located on the top of the transmission bell housing, on the back side ...