Questions & Answers for: bad smell new vacuum

...smell bad like a burning smell? If so it is definitely the motor and then @ that point you may want to get an estimate for motor replacement, and keep in mind of what you spent on the vacuum versus ...

...turbo proheat...It has a burning smell when you turn it on and it will not suction or spray fluid out. I cannot get it to work...It smells real bad and It is only three weeks old. I'd take it back

smell out You should always put a new hepa filter in any E and E2 series Rainbow vacuum, when it taken to a new home, or every two Years, or so, or if your Doughter makes it get funky smelling. :-) It

...bad. I suggest replacing the motor or the vacuum, depending on the condition of the rest of the vacuum, and how much the service center charges for a new motor and service. If it's an older vacuum, ...

what they say? It shouldn't smell bad right out of the box. Here's a little more reading if you need to know more. http://www.vacuummedic.com/blog/2012/10/09/my-brand-new-vacuum-doesnt-work/ Good Luck

...smell. One approach is to remove the part closest to the motor, and if the motor then runs okay, the blockage must be downstream. Perhaps there is an online manual that explains how it comes apart? ...

Smell gas, runs rough, no power, LOUD, Stalls. Fuel pressure regulator bad. Vacuum operated , pull the vacuum line. Smells like fuel. It's bad .Electronic could a fuel pressure sensor on the fuel rail

...smell is there even if not using the power head. It started almost right after buying it brand new. They changed all the filters and cleaned the motor. I have had this done 3 times. Have u got dogs? ...

...smell is bad. Please help dump some new dry baking soda on the floor and vacuum it up Did you buy a new foam filter for the base. I seem to remember there are actually 2 under there. Also make sure ...

smell Model 082023 Dirt Devil vacuum is now making a 'new' noise and is smelling bad. It still seems to work, but for how long? I have had it for many years... Belt or bearing may be going bad . geeez