Questions & Answers for: back seat cushion remov

...back seat from my 1998 Mercury Villager it is not designed to be removed. It is designed to slide back and forth as needed. Section 01-10: Seats and Tracks 1998 Villager Workshop Manual REMOVAL AND ...

Ad

Question about 2004 Mustang

1 Answer

...Seat Back, Rear Sedan Removal Remove rear seat cushion as outlined. Remove rear seat bolster. Refer to Section 01-05 . Remove rear seat bolster mounting bolts. Remove bolster assembly. Remove four ...

Ad

...seat back. Refer to Section 01-10 . Seat Back, Rear 60/40 Split Bench?Sedan Removal NOTE: Safety belt bolts do not secure seat back to vehicle. Remove rear seat cushion as described. Fold down back ...

back and bottom seat cushions to take it out, after you find it by pressuring the bottom cushion and looking back in there). Remove the bolts (each side) securing the seat side bolsters (they are easy

...seat back assembly so that the hanger wire is fully engaged in the package tray slots. Install the lower retaining screws and tighten to 13-19 ft. lbs. (17-37 Nm). Position the seat cushion assembly ...

...back seat in a 1995 Nissan Maxima Rear See Figures 3, 4, 5 and 6 Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to ...

Question about 1995 Maxima

1 Answer

back seat that you push the seat cushion toward the back and a little under the back cushion. Once you have it pushed back lift up on the front of the cushion and pull toward you, it should come out.I

...back seat? such as does the back seat fold down? I searched the owner's manual and there was no mention of folding the rear seats down. If you don't have a manual, you can get one here: ...

...back seat to get to the fuel pump? On what? 3 possible ways the rear seat cushion is removed. On some the seat has clips that lift straight up. Or some have 2 small bolts at front bottom of rear ...

back seat out of 91 leberon convertable Chrysler Le Baron? with an A. the whole thing out. all of it. most seats simply bolt to the chassis floor metal;. some have plastic things there hiding the ugly

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...