Questions & Answers for: amp answering machine power base Vacuums

amp. Brush shuts off when it is not suppose to if you move handle up and down while in vacuuming mode it engages then disengages. Dosen't matter what height brush is set at. that machine is made to do

...motor cut out ,bit of smoke from left base of machine motor stopped ,power light still on ,smelled a little of burning ,only used machine 5 times. Return if still under warranty/ Could be

...power No suction & brush will not turn when power is on. However i have suction from wand attachment Check your belt. It is broken or stretched out. Replace the belt first. Should be your ...

...machine. If you are able to get power to the rest of the vacuum besides the motor, this means that the vacuum is getting power, and the motor's carbon brushes have probably worn out. I can look and ...

power head connects to the body of the machine. Remove the base plate (screws in). Take a look at the back of the head behind the beater bar. There is likely something blocked in the neck of the unit.

I have a ruffler for my kenmore sewing machine and im not sure how to use it i know where to put it and everything but im not sure how to use it Not knowing what model you have, my answer is based on ...

...machine apart, you might not have reassembled it correctly so that the path to the floor (base) plate is obstructed when the vacuum cleaner body is laid back, otherwise: You have either a blockage in ...

...power head Although I'm not familiar with that model I'd start by turning the base upside down and check near the back. Most vacuums are secured there by screws or a lever. Sometime you also have to ...

base of the machine on the right hand side (standing in front of the machine with the clear cylinder directly in front of you), then, when you remove the filter housing you will see a filter with what