Questions & Answers for: Lexmark air duster

sensor causing the printer to detect a jam. Use an air duster can to and shoot some air at all the sensors. The sensors look like little plastic fingers that get pushed down when paper moves over them

...Any tips? rollers can use a little cleaning sounds like.. Same here, and its brand new Use a can of air or an air compresser set at 80 psi and that should help it also remove the paper and close the ...

...do I do next? Thanks!! your printer sencer not working properly. once atime open cover and blow air by air

when we put paper in the printer it goes cricked the paper goes cricked Lexmark printer have paper roller problem take printer for once service paper goes cricked due to the following reasons An ...

...getting stuck all the time Open up every possible panel and look for paper scraps. Buy a "can of air" (compressed air) and blow it out as thoroughly as possible. Do this with the printer power

...a few moments to see if that clears the error. During that time I would recommend using a can of air to spray out the inside of the printer. The sensors can get dust on them and make it appear

I have new ink but still cant hardly see copy, is there something that should be cleaned? YOU CAN GET A CAN OF AIR AND CLEAN THE INK HOLES

...from improper refilling. To be correctly refilled it must be done under a vacuum to prevent air from entering the print head, which has likely happened. As ink flows through the print head it ...

Paper jam in x5470. Can't see paper. Can feed an envelope thru right side, but not left side. your going to have to blow it out with air in a can.

Air printing Driver for iPad The Lexmark X9575 is not compatible with the AirPrint technology. However, it can print photos from you iPad through the LexPrint application. Please refer to the article ...