Questions & Answers for: Mountain adjust gears

rear mountain bike derailluer stops working,then suddenly starts Sometimes when I jiggle it,it then starts working again.I was wondering whats wrong with it and how I can fix it so it continuasly ...

...adjust the gears?.Any help is greatly appreciated. Forget the screws as those are more for fine tuning once you are close to having it set correctly. Where the shift cable connects to the shifter on ...

...adjust the tension at the derailleur so that on the first single click it climbs one gear, and isn't noisy there. More tension 9 winding the barel out ) causes it to rise, less, to drop down. It ...

...has caused the recent problem???? There are good instructions here under front and rear derailleur adjustments:http://www.parktool.com/repair/byregion.asp?catid=53 This is my favourite ...

Shimano Tourney rear derailleur is stuck on smallest gear and will not shift. How do I adjust the tension correctly? There are several things that could be wrong. You could have thrown your chain (you

gears slipping whilst pedaling you need to adjust the tension on the derallieur, you can log onto shimano.com and follow instructions, it is simple enough the way they show it, if not then search ...

MTB and the gears are trying to change down a gear on the rear cogs (go to the larger cog) and need adjusting - which screw is the one to tighten or loosen? Luke Neither screw is for mis-shifts. Those

...off the cable tension a little bit at the shifter and running back and forth through the gears adjusting as you go till it hits 2nd coming down.You can also try backing off the High limit screw ...

gears and all, but the front deralleur won't move up in the 3rd gear. 1st and second I managed. I think that the cable is too lose, and tried to tighten it, but even with the help of my father, we