Questions & Answers for: actuator board

...door won't open Sounds like the electronic actuator for the door lock has failed check for current at the actuator and if this seems ok then replace the actuator if not then replace the circuit

...actuator is too short or the main board is defective Recommendation: Either the eject sensor actuator is not properly actuating the back cover sensor, which is mounted on the rear side of the main ...

...board open (blown fuse). - Action - Turn the main switch off and on. Check the position of the 1st scanner sensor actuator. Actuated De-actuated Does the scanner motor rotate when the main switch is ...

...actuator board, nothing. I noticed power board is sending 205V DC, and actuator board CN103 and 104 receiving 155V DC. Set is turning on fine good picture and sound, after a period of time lamp turns ...

...actuator runs constantly. Is the problem in the control board or in the dash? Hello: I have bad news for you, if you run the actuator without it connected to the door the actuator is ruined, it will ...

...board may have the actuator relays and connectors on the main board. If so plug the wires in. If that is not the solution then you can call the Raypak technical support line and they may be able to ...

The cubes ice button when pressed is giving me crushed ice. Arm under bucket not engaged to solenoid actuated pull behind bucket, or actuator stuck up or no power from board to cube actuator solenoid

...board or a bad actuator if it goes through sensing, fills and washes and drains but just does not spin then odds are the actuator is not shifting it from wash to spin or the main board is sending the ...

board and in the back. Not sure what happened, any answers? Probably the mode door actuator is bad , this actuator controls where the air comes out , vent , defrost , floor etc...... May have video on

...board to fix actuator, which is inside My 2010 chevy equinox 2.4ltr not giving heat. i checked almost everything except actuator which inside dashboard.i stronglly belive there is something wrong ...