Questions & Answers for: how do i access the belt Vacuums

...belt access door and the belt looks good and not broken. In my manual it says there is 2 belts a brush belt and a pump belt. Where is the brush belt and pump belt located.and which belt am I looking ...

...how to put one back on it There should be an access panel on the top side of the cleaner. Pry this open with a screw driver and this should get you access to the area where the belt can be

...two screws and then the top cover canbe removed from the base. With the top cover off you can access the belt. You can get a replacement belt for your model here: Kenmore Progressive Replacement ...

...should be (4) access screws on the base plate that covers the roller brush. Remove those and you will be able to access the belt. The belt you need you can get here: Hoover 38528027 Replacement ...

...two screws and then the top cover can be removed from the base. With the top cover off you can access the belt. You can get a replacement belt for your model here: Kenmore Progressive Replacement ...

...access the belt you will have to remove the hood, to do this you will have to remove at least 4 scews. The base is shaped like the capital letter "T" On the widest part, in the front corner of each ...

...belt. Newer Oreck uprights have an access plate on the right hand side of the base (as you're looking at it from the front). Remove the one screw from the access plate and slide it forward. Snake the ...

...access the belt yourself. If this is the case, please get in touch with us directly so we can discuss this issue further. You can call us free on 0800 298 0298 - our Helpline is available from 7am ...

...access this belt. Sorry folks, but there's no Eureka with this model no. The model number can be found on a sticker, usually on the bottom of the unit. We'll need the correct model to access ...

...belt access door located near the floor cleaning switch nearest to the handle. 4. On the bottom of the machine, use a Phillips head screwdriver to remove the red retainer plate. 5. Remove the black ...