...belt broken, removed back panel to access drum and pulleys. How do I get the new belt around the drum? This site sucks. You should be able to just view issues that were like yours such as this one. ...
...belt? There is an access hatch on the back of the washer. Do some basic troubleshooting first: Open the door and spin the drum by hand. Does it move OK? i.e. it isn't jammed. Does it spin really ...
...to the frame of the drier then when have removed the back you should be able to access the belt. remember to disconnect the drier from the electricity supply before you start to do either of
Question about Aquarius WF000 Front Load Washer
access panel on the back of the machine to replace belt but can't get the belt on as it seems to tight Put it on the motor spindle first then feed it onto pulley. It is tricky with such limited access
...belt is straight. Step 6 Put the rear access panel back on with the screws you took out. Close and re-secure the front and top (in that order) as they were before. Plug in the dryer. thank you vijay ...
Question about Aquarius WF000 Front Load Washer
...cover\ and right hand side panel, this will give you access to the belt. If it is a small compact dryer, then you have to remove the rear panel, and then remove the whole cabinet. Hope this helps
Question about Aquarius WF000 Front Load Washer
...panel the top console panel,,and then remove the whole cabinet to gain access to the drum and belt. Then you need to release the front panel at the top to enable you to fit the belt. Hope this
...belt on a hotpoint wma54 washing machine there is a rear access panel in the center of the back,remove this cover and put the new belt on the motor pulley,then over the larger drum pulley,it takes ...
...belt Hi. Remove top cover of washer. Remove rear access panel. Slacken off the motor fixing bolts, and pull motor towards drum top. Fit belt round motor pulley first, and then feed it round the drum ...
...to make sure the belt is straight. Step 6 Put the rear access panel back on with the screws you took out. Close and re-secure the front and top (in that order) as they were before. Plug in the
Usually answered in minutes!
195 Questions
109 Questions
75 Questions
28 Questions
31 Questions