Questions & Answers for: Frigidaire how do i access the belt

dryer belt replacement I need to know how to get a new belt on. I accessed the back panel to find the belt snapped and laying next to the pulley and motor. It seems to be much different than replacing

access to the belt and pulley system,if not there let me know and we'll try something else-mike Hi there , how do I get the belt around the drum ? do I have to take the whole back panel off the dryer

...front. Take small access panel off back to install belt on motor. Idler pulley pushes against belt to tension it. Thanks, please leave feedback or contact me again for more info if you need

...access panel, get belt off motor 4. remove drum retainer(where applicable) 5. grab belt at top of drum, using belt as handle, yank it straight up off the rear bearing mount( do not remove the screws ...

my dryer drum belt broke i need help in how to install it. How do you get to the area where belt goes? Drum turns but makes noise the washer has to be tipped forward. can access from bottom (and back)

...access panel, get down and look into the dryer with a flashlight and see if you can see the electric motor. Now see if you can see the drive belt around the motor pulley, or if the belt is broken and ...

...tension device (a tension spring or idler pulley bearing) is not working correctly. This can be accessed from the lower rear. If the belt is bad, the front panel must be removed to allow the belt ...

...belt wraps completely around the pulley. Secure the rear access panel back into position to complete the procedure. Note: This advice is intended solely for the asker dolanbox as per live chat ...

...to the tub. Move the idler with one hand and loop the belt onto the motor shaft with the other using the access panel behind the backside of the machine. Here is a video showing how to and other ...

...access the motor and idler arm using a LARGE Phillips-head screwdriver. remove broken belt. Remove 10 of the 11 screws holding the top on (leave the center front one; undo the front corners last, ...