Questions & Answers for: Admiral how do i access the belt

...try replacing the drive belt. tilt the machine backwards for access to the belt below the machine, simply pull off and replace wih new by easing the new belt onto the pulleys. thanks , i'll try

...get to full speed, clothes will be wetter after sping plus vibrates heavily - replace belt. Tilt machine back for access to underside, simply pull belt off and replace, tension is automatic on

...upto full spin speed, drum may wobble more than usual? Change the motor drive belt below the machine, tilt the machine 45 degree backwards to access underneath, belt pulls off and replace same

machine back to access the belt on the underside, simply remove and replace with new, no tools are required, the motor pulley is spring loaded and will move to give some slack or tension automatically

...worn, tilt the machine back to access the belt on the underside, simply pull of and replace the belt - no tools required, the motor pulley is spring loaded and will move to give some slack or

...access to the belt to replace it? Tilt the machine backwards, the belt is accessible from below, remove and replace no tools required, just pull off and fit the new one, the motor pulley is spring ...

...the belt, a worn belt causes the machine to spin slower. Tilt the machine back and the belt is accessible underneath the machine, simply remove and replace no tools

...access the belts. Be prepared to mop up water that will spill once laid on its side. If pump or transmission is jammed, the motor will probably burn up the new belt, too. Make sure nothing is ...

check all are intact. Also check drum is rotating at full speed, if not check and replace drive belt below the machine, tilt machine back to gain access, flip belt off the pulleys and replace same way

...access and remove the front cover, insert a knife or thin blade approx. 4" in the from each side in between the seam on the front panel, this will release the top cover clips and the top cover can be ...