Questions & Answers for: 98 chevy rear brakes

...TO REPLACE MY REAR END WITH DISC BRAKES WHAT REAR END CAN I USE THAT'S COMPATIBLE AND AS WELL GO WITH POSSI REAR END. 98 Z71 Chevy rear end will work on this. You may need to get a kit to install ...

Ad

Question about 1998 C1500

1 Answer

98 Chevy c2500 rear brake lock up I have a 98 Chevy c2500 5.0 with 70,000 miles good truck but when it rains or i drive through a puddle or whenever it gets wet the left rear wheel locks right up at ...

Ad

98 chevy S10.Tried bleeding brakes,Front ok,Rear not reacting Both brake warning lights are on. Pads& shoes are good conditon. Tried bleeding brakes,Front ok,Rear didn't go down when valve was ...

Question about 1998 K1500

1 Answer

...98 chevy cheyenne k1500 and brakes worked fine but e brake seemed way too tight, i didnt want to even try but my father in-law said aww its suppose to be that way so he pressed it to the floor with a ...

98 Chevy Tahoe, drivers side rear tail light assembly wont work, brake / turn signal. Replaced entire assembly, it worked for about 3 days then stopped working again. I need to get this fixed before I

98 chevy 1500 and now the parking brake doesnt work! I did put everything back together as it come off! how do i adjust it so it will work again? but as time passes and brakes where the adjusters push

...98 chevy 3500 dually Ineed to know if I have to remove the axle just to put on new brake shoes on the rear of my 98 k3500 chevy dually? If you have drums on the rer yes you do have to remove the axle ...

Chevy blazer, lost most of brake peddle and found brake line rusted out over rear axle / repaired and not able to bleed rear brakes. Tested at master cly OK, but not bleeding out of ABS unit? How do I

Question about 2003 Envoy

1 Answer

...Chevy Silverado 88-98 brake light switch replacement GMC Sierra tahoe Suburban ... GMC Envoy XL: brake lights..the fuses and the bulbs..lights ... www.justanswer.com > GM Images for 2003 gmc envoy ...

...98 chevy Silverado k1500 causing no brake light or hazards Fuse keeps blowing for brake lights and hazards. Have tried high amp and still blows. Have tail lights and turn signals. Short circuit most ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...