MERCURY VILLAGER TROUBLE CODES SAY KNOCK SENSOR ,I REPLACED IT , FOUND WIRERING DAMAGED REPAIRED THAT BUT KNOCK SENSOR STILL DOSE NOT WORK never replace a knock sensor. it does not matter whether it's
...mercury villager According to the Haynes manual it is under the intake manifold, Upper and lower intake manifolds must be removed for access. If you go to Auto Zone, they have the sensor and can ...
...mercury villager it's in the valley of the engine. Do not ever replace it even if you get a code. A knock sensor will NEVER casue a driveabiity problem. It only retards timing 6 degrees if it senses ...
...Mercury Villager had a knock sensor code and I bought a new knock sensor at Advance for around $80 and my husband put it on the van. Now it's not easy to reach since it's on the engine block, so if ...
...sensor on 1999 mercury villager DO NOT EVER CHANGE A KNOCK SENSOR, just a waste of $600. Ignore KS codes, always. will not harm or help engine. go here
what is a ob2 code po 325 on a 2000 mercury villager it is a knock sensor code
where is the knock sensor on 2002 mercury villager need to know the location of knock sensor on 2002 mercury villager Hi Brandi,here's a link to the knock sensor.Here's what it look's like.
Question about 1999 Villager
Mercury Villager runs rough for about ten minutes then shuts off Engine code po 301 and knock sensor code A knock sensor code will not cause a shut down. dp not replace it. It is a false signal and it
...Mercury villager The "knock sensor" works like a microphone, and is a part that seldom goes bad. They do, rarely, and can be purchased at your local auto parts store. Please state the SYMPTOMS that ...
Question about 2000 Villager
Where isthe knox sensor located on a 2000 mercury villager estate? Ive had a diagnostic test done and that is what it pulled up Try 2000 mercury villager knock sensor location Google Search
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions